-
Price:
CALL FOR PRICE -
Location:
Winnipeg, Manitoba - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2022 Superior Washing Equipment 6203-T36
Fields with asterisks * are required.
Details
- Inventory ID: U00005870
- Status: On Yard
- Make: Superior
- Model: 6203-T36
- Year: 2022
- Serial#: 2153594
Notes
- SUPERIOR 6203-T36 (TWIN 36" WASH PLANT) EQUIPPED AS PER BELOW:
- PLANT SPECIFICATIONS:
- - CONSTRUCTION: MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL BEAMS
- - DISCHARGE CHUTE: MANUAL ROLLAWAY CHUTE CONSTRUCTED OF 1/4" SCTRUCTURAL STEEL
- WITH 1/4" WELD-IN AR 400 LINER
- - BLENDING CAPABILITY: 1/4 PANEL BLENDING TO GATES IN DISCHARGE CHUTE SYSTEM"
- - TOP DECK: OVER KING PIN OR DOWN TO MIDDLE
- - MIDDLE DECK: ONTO CROSS CONVEYOR OR DOWN TO BOTTOM
- - BOTTOM DECK: ONTO CROSS CONVEYOR OR UP TO MIDDLE DECK
- - WALKWAY: WALKWAY AROUND BOTH SIDES AND FEED END OF SCREEN EXTENDS OUT TO THE
- END OF THE DISCHARGE CHUTE
- - OBSERVATION PLATFORM: NOT INCLUDED
- - WALKWAY ACCESS: ACCESS TO BOTH SIDES OFCHASSIS WITH (2) FOLDING STEEP ANGLE
- STAIRS
- - ACCESS GATES: (2) SWING GATES
- - SLURRY HOPPER: SCREEN FEED SLURRY HOPPER FOLDS HYDRAULICALLY FOR TRANSPORT
- WITH (2) 2.5" WATER LINES
- - WYE STRAINER: BOLT-ON WYE STRAINER FOR FRESH WATER SUPPLY TO PREVENT DEBRIS
- FROM ENTERING WASH SYSTEM
- - GREASE PACKAGE: NOT INCLUDED
- - TOOL BOX: 48" X 12" X 16" ALUMINUM TOOL BOX
- - SAFETY TIEOFF: - OVERHEAD SAFETY TIE OFF POSTS WITH CABLE BETWEEN TWO POSTS
- CHASSIS SPECIFICATIONS:
- - AXLE: TRIDEM AXLE WITH (12) 11RX22.5 RADIAL TIRES
- - SUSPENSION: SPRING SUSPENSION
- - BRAKES: COMPLETE AIR BRAKE PACKAGE
- - FIFTH WHEEL: INCLUDED
- - LIGHTS: BRAKE AND DIRECTIONAL SIGNALS
- - MUD FLAPS: INSTALLED BEHIND TRANSPORT WHEELS
- - CRIBBING LEGS: (6) FIXED STRUCTURAL STEEL CRIBBING LEGS
- - LANDING GEAR: (4) HYDRAULIC LIFT-ONLY LEVELING LEGS WITH 9 HP HONDA POWER UNIT
- - TOW EYE: NOT INCLUDED
- - LEVEL ASSIST: NOT INCLUDED
- SPRAY SYSTEM ANDUNDERFLUME:
- - UNDERFLUME CONSTRUCTION: 1/4" AR PLATE
- - UNDERFLUME SPRAY BARS: LOCATED AT FEED AND DISCHARGE END
- - MANIFOLD: 8" BOLT FLANGE FOR FRESH WATER HOOK UP (CUSTOMER RESPONSIBLE FOR
- FRESH WATER PLUMBING TO MANIFOLD)
- - MANIFOLD DISTRIBUTION: DISTRIBUTES WATER TO SCREEN SPRAY BARS SLURRY HOPPER
- FMW WASH BACK AND FINES HOPPER
- CROSS CONVEYOR SPECIFICATIONS:
- - CROSS CONVEYORS: (2) 30" X 12- LONG SLIDE-IN REVERSING CROSS CONVEYORS
- - DRIVE: CLASSI HEAD END
- - GEAR REDUCER: DODGE SHAFT MOUNT
- - MOTOR: 7.5 HP MOTORS TEFC
- - DRIVE PULLEY: 10" DIAMETER DIAMOND LAGGED CEMA CROWN FACED DRUM
- - TAIL PULLEY: 10 DIAMETER CEMA CHEVRON WING PULLEY
- - BEARINGS: DODGE
- - IDLERS: CEMAC 5" DIA. ROLLS SEALED FOR LIFE BALL BEARINGS 20 DEGREE
- - BELTING: 3-PLY 3/16 X1/16 330 PIW
- - BELT SPLICE: FACTORY VULCANIZED BELT SPLICES
- - BELT SCRAPER: (1) SUPERIOR EXTERRA PRIMARY SCRAPER PER CROSS CONVEYOR
- SCREEN SPECIFICATIONS:
- - SCREEN SIZE: GUARDIAN 6X20 3-DECK HORIZONTAL SCREEN
- - SCREEN DRIVE: RIGHT HAND
- - CONFIGURATION: OPERATE IN TRUE HORIZONTAL POSITION
- - SCREEN MOTOR: MOUNT MANIFOLD SPRAY BARS AND HOSES ONTO BASE FRAME
- - FOLDING MOTOR: MANUALLY FOLDING MOTOR FOR PLANT TO TRAVEL AT 12- 6" WIDE
- - SHAFT HOUSING: MILD STEEL PROTECTION CLAMPED TO SHAFT HOUSING
- - SPRINGS: STANDARD COIL SPRINGS
- - FEEDBOX: 24" FEEDBOX WITH 1/4" AR LINERS
- - SIDELINERS: STANDARD SCREEN SIDE-LINERS
- - SCREEN MEDIA: CUSTOMER SUPPLIED
- TOP DECK:
- - TOP DECK TYPE: HEAVY X-BRACE SINGLE CROWN DECK TO ACCOMMODATE 5- SINGLE CROWN
- WIRE CLOTH MEDIA SECTIONS
- - TOP TAKE UP: STANDARD TAKE UP RAILS
- - TOP CROSS MEMBER PROTECTORS: NOT INCLUDED
- MIDDLE DECK:
- - MIDDLE DECK TYPE: HEAVY X-BRACE SINGLE CROWN DECK TO ACCOMMODATE 5- SINGLE
- CROWN WIRE CLOTH MEDIA SECTIONS
- - MIDDLE TAKE UP: STANDARD TAKE UP RAILS
- - MIDDLE CROSS MEMBER PROTECTORS: NOT INCLUDED
- BOTTOM DECK:
- - BOTTOM DECK TYPE: HEAVY X-BRACE SINGLE CROWN DECK TO ACCOMMODATE 5- SINGLE
- CROWN WIRE CLOTH MEDIA SECTIONS
- - BOTTOM TAKE UP: STANDARD TAKE UP RAILS
- - BOTTOM CROSS MEMBER PROTECTORS: NOT INCLUDED
- MATERIAL WASHER SPECIFICATIONS:
- - MATERIAL WASHER: SUPERIOR TWIN 36" X 25- FINE MATERIAL WASHER
- - SCREW SPEED: 20 RPM
- - CAPACITY: UP TO 200 STPH (SUBJECT TO CHANGE BASED ON FINAL GRADATION)
- - WEAR SHOES: RUBBER - CHANGED TO NI-HARD (12-21-21)
- - SCREW MOTOR: (2) 15 HP TEFC
- - GEAR BOX: DODGE SHAFT MOUNT
- PAINTING:
- - STANDARD SUPERIOR PAINT: PAINTED GRAPHITE GRAY (RAL 7024) WITH SAFETY YELLOW
- HANDRAILS GUARDS AND LADDERS
- AES ELECTRICAL SWITCHGEAR FOR 6X20 WASHPLANT:
- - 60X48 NEMA 4 ENCLOSURE WITH BACK PANEL EQUIPPED AS FOLLOWS:
- - 400 AMP MAIN CIRCUIT BREAKER WITH ROTARY OPERATOR LOCKABLE
- - CUSTOM LEG KIT AND WELDED UPPER LEG SECTIONS
- - DRIP SHIELD
- - 800 WATT PANEL HEATER
- - ILLUMINATED E-STOP OPERATOR
- - MANUALLY OPERATED SIGNAL START UP HORN
- - HOUR METER
- - ALL CONTROLS INSTALLED IN ENCLOSURE DOOR
- - (1) NEMA SIZE 3 FVNR MOTOR STARTER SCREEN MOTOR - 40HP
- - (1) ABB ACS850 30 HP VARIABLE FREQUENCY DRIVE TO OPERATE TWIN 15 HP
- SCREW MOTORS WITH POTENTIOMETER SPEED CONTROL
- - (4) NEMA SIZE 2 FVNR MOTOR STARTERS SPARE 1-4- 20HP EACH WIRED TO 60
- AMP HUBBELL RECEPTACLES.
- - (2) NEMA SIZE 1 FVNR MOTOR STARTERS CROSS CONVEYOR 1 AND 25HP
- EACH
- - (1) 100 AMP FEED BREAKER WIRED TO A 100 AMP HUBBELL RECEPTACLE.
- - (1) 60 AMP FEED BREAKER WIRED TO A 60 AMP HUBBELL RECEPTACLE.
- - 5 KVA TRANSFORMER EXTERNALLY MOUNTED.
- - (1) 120 VOLT 20 AMP GFCI DUPLEX RECEPTACLE INSTALLED IN
- WEATHERPROOF BOX AND COVER
- - 100- OF MAIN POWER CORD
- GUARDING:
- - GUARDING: FOR DRIVE AND TAIL PULLEYS V-BELT DRIVE AND RETURN IDLERS. GUARDS
- MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO HAVEGUARDING
- INSPECTED.