KPI-JCI 12-3660

Hopper Feeder:
The Series 12 Feed Hopper has a 10 cubic yard capacity. The top opening of the hopper is 12’ long by 6’ wide. Its sidewalls are made of 3/16” steel plate.
An 8 foot long belt feeder is located underneath the hopper. The feeder has a belt speed of 100 fpm, and it is powered with a gear reducer drive. The head pulley has grooved rubber lagging and the tail pulley is a self cleaning steel wing type. The rate at which material discharges from the hopper feeder is controlled by either a manually adjustable hopper gate or an optional variable frequency drive for the belt feeder.

Conveyor:
The conveyor being fed by the hopper feeder has a 24” deep lattice frame. The conveyor is supported by an adjustable height, manual telescoping pin lock undercarriage on a single axle.
The conveyor is powered with an electric head end v-belt drive. The conveyor belt speed is approximately 350 fpm.

Chassis:
The Hopper Feeder and Conveyor are supported by a heavy duty channel type chassis. A king pin hitch is located on the feed end of the chassis below the belt feeder.

Paint:
One coat of primer, finish coat of Beige acrylic.

Options:
Belt Cleaners
Undercarriage Lift Cylinder
7.5 Electric/Hydraulic Power Pack
CEMA C Idlers
Feeder Impact Idlers
Conveyor Impact Idlers
Rubber Disc Returns
Pintle Hitch
Variable Frequency Feeder Drive
3-ply Belting
Manual Top Fold
Hydraulic Top Fold
Manual Dump Grizzly
Hydraulic Dump Grizzly
Hydraulic Dump Grizzly Remote Control
Dual Tires
Travel Lights
Air Brakes