KPI-JCI 33-42150

Conveyor:
Main conveyor 42” x 80’ with extendable conveyor 42” x 74’
for up to 150’ overall stockpiling length. 70” deep main
conveyor frame. 54” deep extendable conveyor frame.

Idlers:
CEMA C – 5” diameter, 3 roll, 35 degree troughing idlers on
4’ spacing with close-spaced 20 degree idlers at feed point, 8’
spacing on flat steel return idlers.

Belt:
Grade 2; 3 ply 330 PIW, 3/16” x 1/16” covers with mechanical
fasteners.

Power:
1,500 TPH maximum capacity (100 pcf material). 3/60/230-
460 TEFC electric motors, motor mounts, and guards.

Main Conveyor                              Extendable Conveyor
50 Hp                                             50 HP (dual 25 HP motors)
Gear Reducer, V-Belt Drive        Dual Gear Reducer Drive
Dodge Class I, TA-5 reducer     Dodge Motorized Torque Arm
425 FPM                                        625 FPM
18” dia., 3/8” grooved head       16” dia., 3/8” grooved head
16” dia. steel wing tail                16” dia. steel wing tail
Screw take-up                              Screw take-up

Under Carriage:
Heavy Duty V-type with hydraulic powered twin cylinder raise
and cylinder covers. Axle – gullwing axle assembly. Includes:
walking beam travel axle with eight (8) 11-22.5 tires, air
spring suspension on tag axle with two (2) 11-22.5 tires, four
(4) 15-22.5 on hydraulic outriggers on radial axle, less
cylinders. King pin, air brakes, travel, brake and directional
lights, mudflaps, power travel (2) hydraulic planetary power
travel drives, cam arm-style rear undercarriage to maintain
constant wheel radius when raising and lowering conveyor.

Receiving Trough and Radial Hopper:
Rock box style hopper – 5’ 6” long with adjustable rubber
flashing.

Anchor Pivot:
Anchor plate (for radial travel)

Belt Cleaners (Optional):
Martin belt cleaner on head pulley of each conveyor.

Extendable Travel:
Extendable conveyor moves in and out with a cable and
hydraulic winch system to extend the conveyor to 150 feet.

Hydraulics:
15 Hp electric/hydraulic power pack to operate undercarriage
lift, power travel drives, and extendable conveyor. Includes all
hydraulic tubing, hoses, gauges, filter and control valves.

Paint:
One primer coat, finish coat of Beige acrylic.

Wizard Touch Automation (Optional):
Wizard Touch Automation is an automated stockpiling control
system with an easy-to-use touch screen interface that allows
the user to take advantage of pre-programmed stockpiling
capabilities. Includes capabilities for building desegregated
inline, desegregated radial, and full radial piles within a user
specified area.

Electrical:
NEMA 4 enclosure with main disconnect mounted on the rear
undercarriage member; all starters and wiring to motors;
start/stop pushbuttons for main conveyor motor, extendable
conveyor motor, hydraulic power pack motor; cord holders
and supports for power cable; LESS power cable – 460 volt,
3 phase, 60 hertz power required.

Options:
Belt Cleaners
Impact Idlers (3)
Rubber disc return idlers
Self-training idlers
Vulcanized belt splice
Wizard Touch Automated Control System
Radial travel limit switches in addition to centering eye
Remote control – wireless operates within 1,000’
(2) additional power travel drives for 4WD
Hydraulic tank heater
Panel heater
Manual landing jacks
Hydraulic landing jacks with 12VDC power
Center, heavy duty tow eye
Material flow switch

Physical / Operating Characteristics:
Overall Length: fully extended ......................................... 150’
Travel Length; kingpin to tail .......................................... 80’-5”
Travel Width .................................................................. 11’-5”
Travel Height: .............................................................. 13’-11”
Feed Height: .................................................................. 10’-2”
Minimum Discharge Height: ........................................... 20’-0”
Maximum Discharge Height: .......................................... 55’-0”
Kingpin Travel Weight: ........................................... 27,049 lbs
Axle Travel Weight: ................................................ 47,307 lbs

Stockpile Capacities (in tons/yd3):
                                         Fully Desegregated           Full Pile
Conical Pile                   4,569/3,384                         13,452/9,964
1° Pile Segment           190/141                                511/380
90° Pile                          21,669/16,056                     59,442/44,164
180° Pile                       38,769/28,728                     105,432/78,364