KPI-JCI 33-36170

Conveyor Frame:
Main Conveyor - 36” x 100’ long; 70” deep frame
Stinger Conveyor - 36” x 74’ long; 54” deep frame
Extension – conveyor extends to 170’ long with hydraulic cable winch.

Idlers:CEMA B – 5” diameter, 3 roll, 35 degree troughing idlers on 4’
spacing with close-spaced 20 degree idlers at feed point,
8’ spacing on flat steel return idlers
Belt:2 ply 220 PIW, 3/16” x 1/16” covers with mechanical fasteners

Power:
850 TPH maximum capacity (100 pcf material) 1,000 TPH upgrade available.
Dodge TA shaft mount gear reducers with backstops 3/60/230-460
TEFC electric motors, V-belts, motor mounts and guards

Main Conveyor                                         Stinger Conveyor
40 HP                                                        30 HP
415 FPM                                                   615 FPM
TA-5 reducer                                            TA-4 reducer
16” dia., 3/8” grooved head                  16” dia., 3/8” grooved head
14” dia. steel wing tail                           14” dia. steel wing tail
Screw take-up                                         Screw take-up

Undercarriage:
Heavy Duty V-type with hydraulic powered twin cylinder raise and cylinder covers.
Axle – swing type axle with eight (8) 11-22.5 tires.
     Radial axle – transport axle manually swings to stacking position. Hydraulic axle jacks are an option.
     Tag axle with air spring suspension with super single tires is provided for road transport.
Dual power travel – two hydraulic motors with chain and sprocket.
King pin, air brakes, travel, brake and directional lights, mudflaps.
Center heavy duty tow eye
Manual Landing Jacks

Receiving Trough and Radial Hopper:
Rock box style hopper – 5’ 6” long with adjustable rubber flashing

Anchor Pivot:
Heavy duty anchor plate

Belt Cleaners (Optional):
Martin belt cleaner on head pulley of each conveyor

Hydraulics:
15 Hp electric/hydraulic power pack to operate undercarriage lift, power travel drives,
and hydraulic winch for telescoping the conveyor. Includes all hydraulic tubing, hoses,
gauges, filter and control valves

Paint:
One primer coat, finish coat of Beige acrylic

Wizard Touch Automation:
Wizard Touch Automation is an automated stockpiling control system.
It includes a Siemens PLC, and an easy-to-use touch screen interface for various
stockpiling options. Sensors are provided to control the radial movement,
conveyor incline and stinger extension.

Electrical:
NEMA 4 enclosure with main disconnect mounted on the rear undercarriage member;
all starters and wiring to motors; start/stop pushbuttons for main conveyor motor,
extendable conveyor motor, hydraulic power pack motor; cord holders and supports for
power cable; LESS power cable – 460 volt, 3 phase, 60 hertz power required

Options:
Impact Idlers (3)
Rubber disc return idlers
CEMA C idlers vs. CEMA B idlers
Self training idlers – one troughing on the main and one return on the stinger.
3 ply, 330 PIW belting in lieu of 2 ply, 220 PIW
Vulcanized belt splices in lieu of mechanical fasteners
Wizard Touch Automated Control System
Material flow sensor
Remote Control – wireless operates within 1,000’
Drive upgrade to 1,000 TPH (main conveyor 50 HP)
Hydraulic axle jacks – for raising the axle, to aid in positioning from road travel to operating position.
Hydraulic landing jacks vs. manual landing jacks

Physical / Operating Characteristics:
Overall Length: fully extended .......................... 170’ / 51.82m
Travel Length; kingpin to tail ......................... 104’-1” / 31.72m
Travel Width ................................................... 11’-11” / 3.63m
Travel Height: ................................................. 13’-11” / 4.24m
Feed Height: ..................................................... 10’-7” / 3.22m
Minimum Discharge Height: .............................. 14’-0” / 4.27m
Maximum Discharge Height: ................................ 62’-3” / 19m
Kingpin Travel Weight: ............................ 20,000 lbs / 9,072kg
Axle Travel Weight: ............................... 55,000 lbs / 24,948kg

Stockpile Capacities:
90° Stockpile Capacity ................. 80,000 tons / 72,600m tons
180° Stockpile Capacity ........... 140,000 tons / 127,000m tons
270° Stockpile Capacity ........... 200,000 tons / 181,400m tons