KPI-JCI 33-36130

Conveyor:
Main conveyor 36” x 70’ with extendable conveyor 36”
x 64’ for up to 130’ overall stockpiling length. 70” deep
main conveyor frame. 54” deep extendable conveyor frame

Idlers:
CEMA B – 5” diameter, 3 roll, 35 degree troughing
idlers on 4’ spacing with close-spaced 20 degree idlers
at feed point, 8’ spacing on flat steel return idlers

Belt:
2 ply 220 PIW, 3/16” x 1/16” covers with mechanical
fasteners

Power:
850 TPH maximum capacity (100 pcf material). Class I
Dodge shaft mount gear reducers with backstops,
3/60/230-460 TEFC electric motors. V-belts, motor
mounts and guards

Main Conveyor                                                    Extendable Conveyor
30 Hp                                                                   25 Hp
425 FPM                                                              625 FPM
TA-5 reducer                                                       TA-4 reducer
16” dia., 3/8” grooved head                             16” dia., 3/8” grooved head
14” dia. steel wing tail                                      14” dia. steel wing tail
Screw take-up                                                    Screw take-up

Under Carriage:
Heavy Duty V-type with hydraulic powered twin cylinder
raise and cylinder covers. Axle – gullwing axle
assembly. Includes: walking beam travel axle with eight
(8) 11-22.5 tires, four (4) 385/65D-19.5 radial travel
tires, less cylinders. A stiff arm shall be provided in
place of the fold down cylinders. King pin, air brakes,
travel, brake and directional lights, mudflaps, power
travel (2) hydraulic planetary power travel drives, cam
arm-style rear undercarriage to maintain constant
wheel radius when raising and lowering conveyor

Receiving Trough and Radial Hopper:
Rock box style hopper – 5’ 6” long with adjustable
rubber flashing

Anchor Pivot:
Anchor plate (for radial travel)

Belt Cleaner (Optional):
Martin belt cleaner on head pulley of each conveyor

Extendable Travel:
Hydraulic powered winch mounted at the tail end of the
extending conveyor with ¾” wire rope cable

Hydraulics:
10 Hp electric/hydraulic power pack to operate
undercarriage lift, power travel drives, and extendable
conveyor. Includes all hydraulic tubing, hoses, gauges,
filter and control valves

Paint:
One primer coat, finish coat of Beige acrylic

Wizard Touch Automation:
Wizard Touch Automation is an automated stockpiling
control system with an easy-to-use touch screen
interface that allows the user to take advantage of preprogrammed
stockpiling capabilities. Includes
capabilities for building desegregated inline,
desegregated radial, and full radial piles within a user
specified area

Electrical:
NEMA 4 enclosure with main disconnect mounted on
the rear undercarriage member; all starters and wiring
to motors; start/stop pushbuttons for main conveyor
motor, extendable conveyor motor, hydraulic power
pack motor; cord holders and supports for power cable;
LESS power cable – 460 volt, 3 phase, 60 hertz power
required

Options:
Impact Idlers (3)
Rubber disc return idlers
CEMA C idlers
Self training idlers
3 ply, 330 PIW belting
Vulcanized belt splice
Wizard Touch Automated Control System
Remote Control – wireless operates within 1,000’
(2) additional power travel drives for 4WD
Hydraulic fold-down cylinders for Gullwing axle
Manual landing jacks
Material flow switch
1000 TPH Upgrade

Physical / Operating Characteristics:
Overall Length: fully extended ............... 130’-0”[39.6m]
Travel Length; king pin to tail ................... 69’-5”[21.2m]
Travel Width ............................................... 11’-6”[3.5m]
Travel Height: ............................................. 13’-9”[4.2m]
Feed Height: ............................................... 10’-2”[3.1m]
Minimum Discharge Height: ....................... 19’-6”[5.9m]
Maximum Discharge Height: .................... 47’-2”[14.4m]
King Pin Travel Weight:................................. 24,920 lbs
Axle Travel Weight: ....................................... 36,620 lbs

Stockpile Capacities (in tons/yd3):
                                                  Fully Desegregated                      Full Pile
Conical Pile                            3,449/2,555                                    7,844/5,810
1° Pile Segment                    136/101                                           326/242
90° Pile                                   15,660/11,600                                37,210/27,563
180° Pile                                 27,871/20,645                               66,577/49,316
270° Pile                                40,082/29,690                                95,943/71,069