-
Search
Find that New or Used piece of equipment you've been looking for!
Search Inventory
Search Products & Site
Vertical Mast Light Towers MLT 5060KV
Features
The 6kW MLT5060KV is powered with a reliable Tier 4 Kubota engine. The 79" wide wheel-base design and robust construction make off-road transport an easy ride.
Specifications
| ENGINE |
| • Kubota® D1005-E3BG1-MGM-1 - liquid cooled, diesel engine |
| o Standby - 13.1 hp @ 1800 rpm |
| o Prime - 11.7 hp @ 1800 rpm |
| o 3 cylinder |
| o 1.0 L displacement |
| • Fuel consumption (prime) – 0.50 gph (1.89 lph) |
| • 60 Hz engine/generator |
| • Industrial engine exhaust system |
| • Rubber vibration dampers isolate engine/generator from frame |
| • Cooling system capable of operating at 120°F ambient |
| • Full flow oil filter, spin on type |
| • Fuel filter with replaceable element |
| • Dry type cartridge air filter |
| • Polyethylene fuel tank with large diameter opening |
| o 56 gal. capacity |
| o 112 hr. run capacity |
| o 3 ½” fill port |
| ENGINE CONTROLS |
| • Engraved, aluminum punched and anodized control panel |
| • Four position keyed switch – glow plugs (preheat, off, run, start) |
| • Hour meter |
| • Automatic low oil/high temperature shutdown system |
| GENERATOR |
| • Marathon Electric® |
| o Brushless |
| • 6 kW standby output |
| • 120/240 VAC – 50/25A |
| • +/-6% capacitor voltage regulation |
| ELECTRICAL SYSTEM AND CONTROLS |
| • Individual floodlight circuits with 15A breakers |
| • Ballast indicator lights |
| • Four cylindrical ballasts |
| • Individually canned transformers for proper heat dissipation |
| • 30A start limit breaker (assures no load condition exists before starting) |
| • Standard individually breakered convenience outlets: |
| o (1) 120 VAC 20 Amp GFCI duplex outlets (Nema 5-20R type) |
| o (1) 240 VAC 30 Amp twistlock outlets (Nema L6-30R type) |
| • 440 CCA wet cell battery |
| FLOODLIGHTS |
| • Four light fixtures – 1000 watts each - metal halide, quick disconnect |
| • Oval aluminum reflector |
| • Tempered glass lens |
| • Silicone gaskets for moisture and dust protection |
| • Individual floodlight On/Off switches |
| • Internal cabinet light storage |
| WIRING |
| • All wiring is sized to the amperage draw required |
| • AC & DC wiring diagrams are provided |
| MAST |
| • Light Tracking System - distinctive angle fixture design for common light distribution |
| • Mast stowed height: 9.25 ft. |
| • 25ft. maximum extension, 5-section, tubular steel |
| • Urethane guides on all sides of mast tubes |
| • Industrial black powder coat finish |
| • 950lb. automatic self-braking electric winch – easily raises mast vertically |
| • 360° ground level rotation with locking system |
| • Coiled mast cord |
| • Equipped with single lifting eye and fork pockets |
| ENCLOSURE |
| • Steel enclosure – 14-gauge |
| o UV& fade resistant, high temperature cured, white polyester powder paint |
| o 68 dB(A) at 23 feet – prime power |
| • Stainless steel hinges on doors |
| • Multi-lingual operating/safety decals |
| • License plate holder with light |
| • Manual holder with operating manual |
| TRAILER |
| • Front step platform for easy adjustment of light fixtures |
| • Mast support - 3” square tube, ¼” wall |
| • Removable tongue - 48” long |
| • Tubular steel frame - 3/16” wall |
| • Four, 2000 lb. adjustable leveling jacks – 4 point stance |
| • All jacks transport and lock in horizontal position for storage |
| • Side outriggers - 12’ 7” span |
| • Safety chains with spring loaded safety hooks |
| • Combo hitch – 2” ball hitch and 2 ½” pintle ring |
| • Single wall polyethylene fenders |
| • DOT approved tail, side, brake, and directional lights |
| o Recessed rear lights |
| • 3500 lb. leaf spring axle |
| • ST205/75R15 – 6 ply |
| • 68.5 in. axle span |
| WEIGHTS & DIMENSIONS |
| • Dry weight: TBA lbs (TBA kg) |
| • Operating weight: TBA lbs (TBA kg) |
| • Mast stowed: 120 x 79 x 111 in (3.05 x 2.01 x 2.82 m) |