Generac Magnum MGG200

Our gaseous generators provide cost effective power by using well gas byproduct as fuel. One gaseous generator can save an oil and gas site as much as $200K per year in diesel costs.

Our gaseous generators operate on well gas, natural gas or propane and are ready to be deployed for use as prime power for a number of oil field operations. If you have off the grid power needs we have a product to fit your needs.

Engine:

Generac® - turbocharged, gaseous engine
Standby - 320 hp @ 1800 rpm
6 cylinder
12.9 L displacement
EPA certified stationary emergency
Fuel consumption rates
(natural gas):
100% - 2571 ft3/hr (73 m3/hr)
75% - 2083 ft3/hr (59 m3/hr)
50% - 1543 ft3/hr (43.7 m3/hr)
Inlet fuel regulator
Gas/water separator
Cooling system capable of operating at 122°F ambient
Clutch fan
Low coolant shutdown
Oil drain plumbed to exterior
Kenco oil level controller with 5 gallon reservoir
Rubber vibration dampers isolate engine/generator from frame
Disposable air filter - paper element
60 Hz engine/generator
Electronic isochronous governing

Generators:

Generac®
- Brushless - 4 pole - Class H insulation
Voltage regulation +/- 0.25%
Permanent Magnet Generator (PMG)

System Output:

Three phase – 277 / 480V High Wye
200 kW – standby, three phase
150 kW – continuous, three phase
Performance on non-standard gas will vary. Gas content must be approved by Magnum.

System Controls:

Generac® H-100 controller
Encapsulated board with sealed harness
4-20mA voltage-to-current sensors
Advanced diagnostics and communications

Electrical Controls:

Eaton DH365URK safety disconnect
NEMA 3R rainproof enclosure
Lockable lug box with safety switch
Cable entry guides to the lug box
Restricts access of foreign objects
Output ground connection lug inside lug box
400A/600V rating
UL listed
350A main breaker
(2) 1155 CCA wet cell batteries
Battery charger

Enclosure:

Steel, sound attenuated enclosure
80.5 dB (A) at 23 feet – prime power
Fully lockable enclosure
Emergency stop switch located on outside of enclosure
Central lifting point
Multi-lingual operating/safety decals
Document holder with operating manual including AC/DC wiring diagrams

Trailer:

DOT approved tail, side, brake, and directional lights
Recessed rear lights
Transportation tie downs
Safety chains with spring loaded safety hooks
3” lunette ring hitch (2 5/16” ball option)
(2) 6000 lb. axles with surge brakes (electric option)
5000 lb. tongue jack with footplate
ST235/80R16 tubeless tires – 10 ply
NATM compliant

Weight & Dimensions:

Skid mounted
Operating weight: 6577 lbs plus well gas equipment (2983 kg)
154 x 54 x 70 in (3.91 x 1.37 x 1.79 m)
Trailer mounted
Operating weight: 7973 lbs plus well gas equipment (3616 kg)
210 x 86 x 86 in (5.33 x 2.18 x 2.18 m)

Warranty:

1 year/2000 hours