KPI-JCI 33-36136LP

Conveyor:
Main conveyor 36” x 80’ with a tapered tail section to achieve
a feed height of approx. 5’ 6”. Extendable conveyor 36” x 60’
extends to an overall stockpiling length of 136’. 52” deep
mainframe. 36” deep extendable conveyor frame

Idlers:
CEMA B – 5” diameter, 3 roll, 35 degree troughing idlers on 4’
spacing with close-spaced 20 degree idlers at feed point, 8’
spacing on flat steel return idlers

Belt:
2 ply 220 PIW, 3/16” x 1/16” covers with mechanical
fasteners

Power:
850 TPH maximum capacity (100 pcf material). Class I Dodge
shaft mount gear reducers with backstops. 3/60/230-460
TEFC electric motors. V-belts, motor mounts and guards

Main Conveyor                                                Extendable Conveyor
30 Hp                                                                25 Hp
425 FPM                                                           625 FPM
TA-5 reducer                                                   TA-4 reducer
16” dia., 3/8” grooved head                         16” dia., 3/8” grooved head
14” dia. steel wing tail                                  14” dia. steel wing tail
Screw take-up                                                Screw take-up

Under Carriage:
Heavy Duty V-type with hydraulic powered twin cylinder raise
and cylinder covers. Axle – gullwing axle assembly. Includes:
walking beam travel axle with eight (8) 11-22.5 tires, four (4)
385/65D-19.5 radial travel tires, less cylinders. A stiff arm
shall be provided in place of the fold down cylinders. King pin,
air brakes, travel, brake and directional lights, mudflaps,
power travel (2) hydraulic planetary power travel drives, cam
arm-style rear undercarriage to maintain constant wheel
radius when raising and lowering conveyor

Receiving Trough and Radial Hopper:
Rock box style hopper – 5’ 6” long with adjustable rubber
flashing

Anchor Pivot:
Anchor plate (for radial travel)

Belt Cleaner (Optional):
Martin belt cleaner on head pulley of each conveyor

Extendable Travel:
Hydraulic powered winch mounted at the tail end of the
extending conveyor with ¾” wire rope cable

Hydraulics:
10 Hp electric/hydraulic power pack to operate undercarriage
lift, power travel drives, and extendable conveyor. Includes all
hydraulic tubing, hoses, gauges, filter and control valves

Paint:
One primer coat, finish coat of Beige acrylic

Wizard Touch Automation:
Wizard Touch Automation is an automated stockpiling control
system with an easy-to-use touch screen interface that allows
the user to take advantage of pre-programmed stockpiling
capabilities. Includes capabilities for building desegregated
inline, desegregated radial, and full radial piles within a user
specified area.

Electrical:
NEMA 4 enclosure with main disconnect mounted on the rear
undercarriage member; all starters and wiring to motors;
start/stop pushbuttons for main conveyor motor, extendable
conveyor motor, hydraulic power pack motor; cord holders
and supports for power cable; LESS power cable – 460 volt,
3 phase, 60 hertz power required

Options:
Impact Idlers (3)
Rubber disc return idlers
CEMA C idlers
Self training idlers
3 ply, 330 PIW belting
Vulcanized belt splice
Wizard Touch Automated Control System
Remote Control – wireless operates within 1,000’
(2) additional power travel drives for 4WD
Hydraulic fold-down cylinders for Gullwing axle
Manual landing jacks
Material flow switch
1000 TPH Upgrade

Physical / Operating Characteristics:
Overall Length: fully extended ............................. 136’[41.5m]
Travel Length; kingpin to tail .............................. 80’-8”[24.6m]
Travel Width ........................................................ 11’-6”[3.5m]
Travel Height: ...................................................... 13’-3”[4.0m]
Feed Height: .......................................................... 6’-1”[1.9m]
Minimum Discharge Height: .................................. 20’4”[6.2m]
Maximum Discharge Height: ............................ 46’-10”[14.3m]
Kingpin Travel Weight: ........................................... 13,800 lbs
Axle Travel Weight: ................................................ 40,000 lbs

Stockpile Capacities (in tons/yd3):
                                      Fully Desegregated              Full Pile
Conical Pile                2,122/1572                             7,567/5,605
1° Pile Segment        106/78                                     312/231
90° Pile                       11,635/8,619                          35,620/26,386
180° Pile                     21,148/15,666                       63,673/47,167